Features:

• Excellent sound quality and clarity
• Range from 300 to 500 ft!
• 1 channel pre-tuned operation
• Green power light
• Audio signal indicator light
• Provides both Mic input from microphone and Audio input from a PA amplifier for ease of use
• Mic input level adjustment
• Antenna RF output connector on transmitter

Specifications:

• Dimensions: 3.25" W x 6.87S" Lx 1.75" H (82.5 mm x 174.6 mm x 44.5 mm)
• Weight: 13 oz., 368.5 g
• Color: Black epoxy paint with white legends
• Power (U.S./Canada): 10S-130 VAC, 5O-60 Hz, O.5W with power supply (included)
• Operating Freq's: CH A (72.1 MHz), CH B (72.3 MHz), CH C (72.5 MHz), CH D (72.7 MHz), CH E (72.9 MHz) CH F (75.5 MHz), CH G (75.7MHz), CH H (75.9MHz), CH I (74.7 MHz), CH J (7S.3 MHz) CH E (72.9 MHz) is standard
• Frequency Selector: Internal switches, 10 channels
• RF Field Strength: 8000 µV /m at 30 m Max., 20 mW typical
• Nominal Range: 300-500 feet (90-150 m)
• Modulation: 75 kHz (wide-band) max,
• Stability: ± .005% over 0-50˚C
• Pre-Emphasis: 75 µS
• Frequency Response: 100 Hz -15 kHz ± 3 dB with TR 100 Receiver
• Signal to Noise Ratio: 55-60 dB with R7 Receiver
• Distortion: 1% Max, THD
• Audio Processor: Fast-attack, fast decay compressor
• Operating Requirements: 0-50°C ambient temperature, non-condensing, non-corrosive atmosphere
• Approvals: FCC, DOC
• FCC ID: CNMT17
• Warranty: 1 Year, parts and labor
• Front Panel:

• Mic Input: 3.5 mm mini phone jack for use with condenser microphones. Supplies +DC power for condenser/electret microphones.
• Mic Input Level: 1-10 mV, nominal
• Level Control: Rotary potentiometer, Screwdriver-adjust control used to set the microphone input level or the audio input level.
• Audio Indicator Light: Yellow LED, Flashes when audio signal is present.
• ON Indicator Light: Green LED, Glows when power is applied to the transmitter. There is no on/off switch. The TT1-17 is designed to be left on continuously,
• Rear Panel:

• Line-Level Input: RCA Jack, Hi Z, unbalanced, 100 KΩ input impedance
• Line Input Level: 100 mV min. to 1.0 V max., .5 Vrms nominal
• Antenna Output Connector: This connector is defeated, as specified by FCC Rules.